The maxilla bone or maxillary bone is a fused (paired) bone that provides part or all of the bony structure of the eye sockets, the nasal passage, the hard palate, the left and right maxillary sinuses, and the upper tooth sockets. It is the second-largest facial bone. Without the maxilla, we can neither eat properly nor speak clearly. The maxilla bone is composed of the main body with four processes or projections. It borders nine facial and cranial bones.
Maxilla Bone Location
Maxilla bone location is in the mid-face. It runs from just below the glabella – the part of the forehead that sits between the eyes – along either side of the nose and joins below the nasal cavity to form the upper jaw.
The maxilla bone extends approximately one-third of the way along either cheek. If you press into the skin just under one of your cheekbones, you can feel the maxilla bone as it moves down to form the upper jaw.
The maxillary bone is an irregular bone composed of two fused halves. The point of fusion is at the vertical line (the intermaxillary suture) that runs from the nasal septum to between the two middle front teeth. Some textbooks call this an articulation, others do not.
This means that sometimes the maxilla bones (and mandible bones) are counted as two bones; sometimes as one. As both the upper and lower jawbones fuse at around the age of two years, either is correct.
Maxilla Bone Anatomy
Maxilla bone anatomy is better understood when we first take a quick look at facial development in the fetus.
During gestation, five different areas are responsible for facial tissue formation. These are the left and right maxillary prominences, the left and right mandibular prominences, and the frontonasal prominence.
Over time, the right and left mandibular processes meet and fuse to form the lower jaw. The upper jaw and cheekbones are the result of maxillary and mandibular prominence fusion. Fusion requires the developing maxilla to spread into the cheeks and up towards the eyes.
The fetal nose develops from the frontonasal process; paranasal sinuses grow outwards from the nasal cavity. Finally, the hard palate requires fusion at either side of the maxillary prominences with the fetal frontonasal prominence. The very basic image below shows the fetal mandibular process (A), maxillary process (B), and frontonasal process (C).
When this development is interrupted by genetic mutations or environmental factors, a cleft lip and/or cleft palate (orofacial cleft) might be the result.
A cleft lip only affects the soft tissue of the upper lip. A cleft palate means that the hard palate – formed by the fusion of the fetal maxillary prominences – is incomplete and remains open. There is little to no separation between the oral and nasal cavities.
Around one in every 1,700 babies is born with a cleft palate. Both cleft lips and cleft palates can be surgically treated with huge success.
Maxilla Bone Surfaces
The maxilla bone has five surfaces and these border nine other bones.
These borders and bones are:
- Superior surface border with the frontal bone
- Posterior surface border with the ethmoid, palatine, and lacrimal bones
- Medial surface border with the opposite maxilla bone, nasal bone, and vomer
- Inferior surface border with the inferior nasal concha
- Lateral surface border with the zygomatic bone
An extremely important area of bone runs under the gums of the upper teeth. This is the alveolar process of the maxilla bone that provides sockets (dental alveoli) for the teeth. It has no border with another facial bone.
Smoking, sugary foods, and bad dental hygiene can significantly lower bone density in this area, making the teeth loosen and eventually fall out. Even second-hand smoking poses a real risk to dental health.
The alveolar process of the maxilla has not been correctly marked in the below image; the process is the entire ridge of thicker bone that follows the row of upper teeth. The arrows indicating the alveolar process are actually pointing to multiple dental alveoli. Note the almost hairline suture near the back of the hard palate – this shows the articulation between the maxilla and thin horizontal plates of the two palatine bones.
The alveolar process also provides an attachment point for the buccinator muscle. Whenever you chew, the buccinator muscle keeps your cheeks close to your teeth and so aids mastication by pushing food towards the molars. The buccinator muscle is important for the sucking reflex of newborns and also helps us smile.
Anterior View of the Maxillary Bone
Looking at the maxilla bone from the front, we see two vertical projections at either side of the nasal cavity. Each rises to meet the frontal bone and each projection is, therefore, called the (right or left) frontal process of the maxilla bone. The below image is a lateral (side) view but the frontal process of the maxillary bone is very visible.
Each frontal process has a small groove – the infraorbital margin – that marks the lower margin of the eye socket. This groove continues into the orbital process of the neighboring zygomatic bone. The infraorbital margin also provides an origin for the levator labii superioris muscle that raises the upper lip.
The superior (upper) border of the maxilla bone is at the top edge of each frontal process. This very short border joins with the frontal bone of the cranium and starts at the same level as the upper eyelids. In the below image, the suture is to the left (red arrow).
Where it continues across the frontal bone is the articulation between the nasal and frontal bones. Also, take note of the many holes in the frontal bone and at the top of the maxilla border. These are foramina – small holes that enable blood vessels and nerves to travel from skin to brain.
To either side of the nasal cavity, there are two much larger holes. These are the infraorbital foramina that create openings for the left and right branches of the infraorbital artery, vein, and nerve to pass through. The purely sensory infraorbital nerve innervates the skin and mucous membranes of the central zone of the face.
To the side of each infraorbital foramen furthest from the midline, the zygomatic process of the maxilla bone begins. This process – not surprisingly – borders with the zygomatic bone at the zygomaticomaxillary suture. The zygomatic process is a grooved, blunt projection; the maxillary process of the zygomatic bone fits neatly into it.
Under the nasal cavity is the medial border of the maxillary bone where the right and left maxillae fuse. Articulations with the nasal bones and vomer are also found on the medial border; the vomer bone divides the base of the nasal cavity into two.
Posterior View of the Maxillary Bone
The posterior surface is a little more complex. The bone borders lie deeper and are hard to visualize when looking at your face in the mirror, for example. A view of the maxilla bone from the sideshows where the lacrimal (or lachrymal) bones border the posterior surface of the maxillary bone. This border leads to a concave groove that runs down the nasal cavity, providing a channel for tears.
Close to the lacrimal bone articulation are further borders with the orbital projections of the ethmoid and palatine bones. These projections help to form the complicated structure of the eye sockets.
Like the anterior surface, the posterior surface close to the eye socket also features the continuation of the infraorbital margin and part of the infratemporal fossa wall.
On the inside of each frontal process are articulation points with the paired nasal bones that sit between them.
Inferior View of the Maxilla Bone
When the mouth is opened wide, the first three-quarters of the hard palate indicate the position of the palatine process of the maxilla bone.
The palatine process joins the palatine bone to the maxilla bone at the hard palate of the oral cavity. The back third of the hard palate is composed of the palatine bone and not the palatine process of the maxillary bone.
The side borders of this maxillary process become the alveolar process of the maxilla bone as they approach the upper teeth. You can see the raised ridges of thicker bone (the alveolar process) around the teeth in the above image.
Even more difficult to see in the average labeled maxilla bone diagram is its articulation with the inferior nasal concha. The three nasal conchae or turbinates increase the amount of air that can be held within the nasal cavity, allowing larger volumes of inspired air to be slightly warmed and moistened before entering the lungs.
The lowest of the three turbinates – the inferior nasal concha – articulates with the inferior surface of the maxillary bone.
Body of the Maxilla Bone
The largest section of the maxilla bone is its body. This body houses the left and right maxillary sinus. The maxillary sinus is a paranasal sinus that opens into the middle of the nasal cavity and only reaches its full size when the permanent teeth emerge. The photograph below shows the large space of the sinus on the posterior (back) surface.
Part of the maxilla body helps to form the infratemporal fossa – an extremely complex area containing various blood vessels, muscles, and nerves. The maxillary body ends where any of the four processes begins.
Processes of the Maxilla Bone
There are four maxilla bone processes. When using these anatomical terms it is important to add ‘of the maxilla bone’ or ‘of the maxillary bone’. This distinguishes the bone of origin.
Other facial and cranial bones that articulate with the same bones may also have similarly-named processes. For example, both the zygomatic and maxilla bones have frontal processes as both of them articulate with the frontal bone; a single alveolar process is found in the bones of both the upper and lower jaw. This is why naming the bone of origin is important.
The four maxilla bone processes are:
- Palatine process of the maxilla bone (or palatal process)
- Frontal process of the maxilla bone (or nasal process)
- Zygomatic process of the maxilla bone
- Alveolar process of the maxilla bone
What Type of Bone is the Maxilla Bone?
The answer to the question, “What type of bone is the maxilla bone?” is simple – it is an irregular facial bone. You can refer to the maxilla bone as a single unit or as two paired but fused bones.
Maxilla Bone Fracture
Malo and maxillary bone fractures (malo refers to the cheekbone/zygomatic bone) are relatively common. They are usually caused by falls, motor vehicle accidents, and violent assaults.
Up to 25% of facial fractures involve the maxillary bone. It is centrally located and especially assaults tend to concentrate on this part of the face. Maxillary bone fractures with displacement can be life-threatening.
Mid-facial fractures are usually categorized as one of three Le Fort injury types. Le Fort type I fractures are the result of a downward force against the upper teeth and are the least serious of this type of maxilla bone fracture. Tooth loosening or tooth loss is common in Le Fort type I injuries.
Le Fort type II fractures are more centralized and affect the area around the middle of the nasal cavity, often causing trauma to multiple facial bones.
Le Fort type III fractures quite frighteningly referred to as cranial-facial separation, are the most serious. These slightly higher fractures are commonly caused by blunt force trauma to the nasal bridge. Such force not only damages the frontal process(es) of the maxilla bone but also smaller and more delicate bones such as the orbital bones, sphenoid bone, and ethmoid bone.
It is not uncommon for cerebrospinal fluid to leak through the nose or ears with a Le Fort type III fracture. Other symptoms of Le Fort type III injuries – apart from pain and changes in vision and hearing – are raccoon eyes (Battle’s sign), nose bleeds, and a flattened face.
The more serious the maxilla bone fracture, the higher the possibility that the majority of facial bones are damaged. Airway obstructions caused by facial bone displacement are medical emergencies. Even so, modern surgery can reduce scarring to a minimum in many cases.